CTEK Adds To DC/DC Charger Range

The DC/DC chargers when you don't have access to mains power

CTEK has launched both the D250S Dual and CTEK SmartPass, a new range of innovative DC/DC onboard battery chargers.

CTEK’s DC/DC chargers are powered from the alternator and, will not only charge leisure batteries, but also condition and extend their life, saving the consumer valuable time and money.

The new D250S Dual refines all DC sources including alternators, and solar and wind power, to perfectly match the amount of charge the battery requires whilst minimising charge time.

As with all CTEK chargers, the D250S Dual is a multi-step charger that automatically adjusts the charging voltage and current according to the battery state of charge and temperature – reducing a battery’s charge time.

A sensor inside the CTEK charger senses the surrounding temperature and adjusts the required charge by increasing the voltage from 14.4V to 14.7V in cold weather ensuring the battery is fully charged, and dropping the voltage in hot weather to avoid the problems of overcharging.

Available to work in tandem with the D250S Dual, the CTEK SmartPass is a total energy regulator for energy production, usage and storage in any 12V DC system.

The CTEK SmartPass allows energy produced from solar, wind, AC chargers and alternators are synchronised to maximise output and minimise charge time. The energy is then able to be distributed to different battery banks and/or equipment such as lights and navigational systems that need additional energy supply, while ensuring the battery remains fully charged.

Combining the CTEK D250S Dual and CTEK SmartPass ensures optimal battery charging.

The CTEK SmartPass manages the energy transfer through the CTEK D250S Dual, which then converts and produces the optimal voltage of 14.4V, even if the alternator only produces 14V.

CTEK Partners With Audi to Create Branded 3.6A Battery Charger

Intelligent battery chargers to feature in latest Audi accessory range

CTEK has announced a partnership with globally renowned automotive manufacturer, Audi, to create an Audi branded 3.6A battery charger that will be available to all Audi owners as an aftermarket accessory.

CTEK was chosen as Audi’s partner based on its unique battery charging technology and will now develop and supply a new 3.6A, fully automatic, four-stage battery charger incorporating CTEK’s patented desulphation and maintenance charging modes.

Suitable for all 12V lead-acid batteries, the new charger is also capable of easily handling the more demanding AGM batteries used in many vehicles with stop-start technology where huge additional strain is placed on the battery.

As with all CTEK battery chargers, the new Audi charger is spark and short circuit proof, reverse polarity protected and IP 65 classified (splash and dust proof)so it´s completely safe for the user and the vehicle as well as suitable for outdoor use.

The charger will be adapted to fit European 230V standards, a similar version the specific UK plug as well as a model for the North American markets with 110V.